Hydraulic Piston Pump
Hydraulic piston pumps use a plunger-like apparatus to move hydraulic fluids through a cylinder in order to effectively raise the pressure for machinery, allowing it to push, pull and lift heavy loads. This particular style of hydraulic pump is the driving force behind heavy-duty machines such as cranes, loaders, backhoes, diggers, and excavators. Piston pumps are not limited to construction work and are also found in aeronautic, automotive, power generation, marine, military, and manufacturing industries, to name a few.
Quick links to Hydraulic Piston Pump Information
Design of Hydraulic Piston Pumps
The popularity of hydraulic piston pumps stems from their ability to maximize energy use and productivity. Even a hydraulic hand pump powered by a foot or hand pedal can convert as little as 4.5 pounds of force into 100 pounds of load-moving force. Electric hydraulic pumps can reach pressure ranges up to 4,000 PSI. As capacities show such variability, the intended use of a pump should be carefully considered. Several other variables should also be taken into account. Task-specific power sources, operating speeds, maximum fluid flows, and pump weights are widely available in standard and custom configurations. Measurements such as diameter, rod extension length, height, and width should also be considered, especially when a hydraulic piston pump is to be fitted to a pre-existing hydraulic system.
Types of Hydraulic Piston Pumps
There are two basic variations of hydraulic piston pumps: axial and radial pistons. The essential difference between the two is the placement of the pistons within the hydraulic cylinder and the directionality of the movement. Axial pistons run parallel to the cylinder, while radial pistons are perpendicular to an inner column running through the cylinder. The latter provides a rotary movement. Axial pistons provide linear motion and are more popular in heavy machinery contexts. Both can be single action or double action pumps. Despite the differing piston placements, both systems function in a similar fashion. Hydraulic fluids, usually oil or water composites, are housed in a reservoir connected to the main cylinder by tubes or hoses. The cylinder houses the pistons and one or more intake check valves and an equal number of discharge check valves. When the piston is withdrawn, it creates a vacuum, and the liquid solution is pulled into the cylinder. The piston is then returned to its original position and the intake valve is sealed. This creates pressure within the enclosed space and compresses the fluids. The plunger-like action is repeated until enough pressure is accumulated to force the hydraulic fluids out through the discharge valve. This creates the energy needed to work the attached machinery and move the intended load.