This article presents detailed information about ultrasonic cleaning.
Read further to learn more about:
Ultrasonic cleaning is a unique method that utilizes ultrasonic sound wave frequencies, generally starting at 20 kHz, to initiate cavitation through alternating compression and rarefaction. This process involves placing the object to be cleaned in a tank filled with a specialized cleaning solution. The solution's concentration, tank temperature, and immersion duration are carefully controlled to ensure the best cleaning performance. The cavitation effect produces intense agitation that effectively removes contaminants from the surface, ensuring a comprehensive clean of all accessible areas.
Cavitation takes place when tiny bubbles or voids are formed in a liquid due to a sudden decrease in pressure, and these bubbles swiftly collapse as pressure increases. The repeated implosion of these voids produces cyclic stresses that can lead to surface erosion. The type of cavitation that occurs immediately is referred to as inertial or transient cavitation, which can cause notable surface damage and poses significant concerns in pump operations, as it can significantly reduce the equipment's lifespan.
Acoustic oscillations that occur at lower energy levels can generate voids that maintain a stable size instead of collapsing. This phenomenon is known as non-inertial or stable cavitation. In certain instances, this less intense form of cavitation suffices to disrupt the adhesive forces between particles and surfaces.
Acoustic waves comprise alternating phases of high and low pressure. The compression occurs during the high-pressure phase, while rarefaction happens during low-pressure phases, causing small voids through rapid liquid vaporization. These voids compress again during the next high-pressure cycle. Despite being microscopic and invisible during the operation, they generate localized zones of high energy, with temperatures rising up to 5,000 K and pressures reaching around 500 atm. The collapse of these voids can result in microscopic jets with velocities of up to 300 m/s.
It's essential to recognize that the amplitude of sound waves alone doesn't determine the type of cavitation that will occur. No precise mathematical formula exists to define cavitation generation. Factors such as the medium's composition, solute concentration, and temperature can significantly influence the process. During cleaning operations, both inertial and non-inertial cavitation can occur simultaneously.
An ultrasonic cleaning machine, also known as an ultrasonic cleaner, is a highly effective device designed for precision cleaning of a wide variety of objects, from industrial tools to delicate medical instruments. Understanding the internal structure and function of each component is essential for choosing the right ultrasonic cleaning equipment for your specific needs. An ultrasonic cleaner typically comprises two main subsystems: the acoustic wave generation unit and the containment section for the cleaning fluid and items being processed. These core parts are fundamental to all ultrasonic cleaning systems, no matter their size, application, or level of sophistication. Below, we explore the key components, their roles in the ultrasonic cleaning process, and how they contribute to efficient, high-quality cleaning results.
The ultrasonic transducer is a critical part of any ultrasonic cleaning machine, serving as the mechanism that transforms electrical or mechanical energy into ultrasonic vibrations. This vibration at high frequencies (typically ranging from 20 kHz to 200 kHz) is the force behind powerful cavitation effects, responsible for the removal of contamination, debris, oils, and particulates from the surfaces of submerged items. There are two main types of ultrasonic transducers commonly used in the cleaning industry: piezoelectric and magnetostrictive. These transducers employ advanced materials that deform microscopically—on the order of 10-6 meters per meter—when subjected to electrical currents or magnetic fields, respectively, thus enabling consistent, reliable ultrasonic wave generation for industrial, commercial, and laboratory cleaning applications.
Piezoelectric Ultrasonic Transducers: The piezoelectric transducer is the most widely used type in ultrasonic cleaning applications. It works by converting alternating electrical current (AC) directly into mechanical energy through the inverse-piezoelectric effect. In this process, the application of an electric field to certain crystalline materials—such as lead zirconate titanate (PZT) and barium titanate—causes atomic-scale geometric changes that generate precise high-frequency mechanical vibrations. These vibrations produce ultrasonic waves that propagate through the cleaning fluid, dislodging contaminants even in complex geometries like blind holes, internal channels, and intricate assemblies. Piezoelectric transducers are favored in precision ultrasonic cleaning tasks due to their high energy conversion efficiency—typically transferring up to 95% of input power to the cleaning tank, resulting in a total system efficiency of around 70%. This efficiency translates to cost-effective operation and reduced energy consumption.
While piezoelectric transducers excel in delivering powerful ultrasonic cleaning action, they do have some drawbacks. Over time, aging and depolarization of charge carriers in the crystal structure can reduce device effectiveness—a challenge that manufacturers mitigate through pre-aging techniques and advancements in bonding methods. Additionally, the mounting process typically relies on high-strength epoxies, which, if fatigued by prolonged cyclic loading, may eventually degrade. Nonetheless, modern adhesives and improved design standards now ensure a reliable lifespan, making piezoelectric transducers the preferred choice in most industrial ultrasonic cleaning machines.
Magnetostrictive Ultrasonic Transducers: Magnetostrictive transducers operate based on magnetostriction, where a ferromagnetic material such as nickel changes dimension in response to an applied magnetic field. This dimensional change enables the direct conversion of electromagnetic energy into the high-frequency mechanical oscillations needed for ultrasonic cleaning. These transducers are renowned for long-term durability and mechanical robustness and are often chosen for heavy-duty ultrasonic cleaning systems, including those used in automotive, aerospace, and manufacturing industries. Unlike piezoelectric transducers, magnetostrictive units are typically braze-bonded to the cleaning tank, ensuring a secure, vibration-resistant mounting and limiting the risk of bond failure over extended use.
However, the greater reliability of magnetostrictive transducers is balanced by a relatively lower energy conversion efficiency, typically ranging from 30% to 40%, due to dual-stage transformation losses (electrical → magnetic → mechanical). This type of transducer is best suited where maximum operational uptime is needed and slightly lower efficiency is acceptable. Magnetostrictive ultrasonic transducers remain stable throughout their service life, making them ideal for continuous, high-volume industrial ultrasonic cleaning operations.
The ultrasonic generator (sometimes called an ultrasonic power supply) is the electronic “brain” of an ultrasonic cleaning machine. Its main function is to draw power from the mains supply (at 50 or 60 Hz), process it, and convert it into the high-frequency electrical signals required to excite the ultrasonic transducers at pre-set or dynamically varying ultrasonic frequencies. The operating frequency can substantially impact cleaning results: low frequencies (20–40 kHz) generate powerful cavitation suitable for large, rugged components with tenacious contaminants, while high frequencies (above 80 kHz and into the MHz range) provide gentle, pinpoint cleaning for sensitive items like printed circuit boards, optical parts, pharmaceuticals, and jewelry. This flexibility makes ultrasonic generators ideal for a broad range of parts cleaning, medical device reprocessing, and laboratory sample preparation applications.
Advanced ultrasonic generators may be equipped with features such as sweep frequency technology, which modulates the frequency around a target value to eliminate dead zones and hot spots in the cleaning tank. This ensures uniform cavitation and thorough cleaning throughout the bath, protecting delicate parts from localized damage and improving process consistency. When using multiple transducers in an ultrasonic cleaning system, sweep frequency prevents standing wave patterns that can otherwise cause inconsistent ultrasonic cleaning results. Feedback-controlled systems further optimize cleaning performance by automatically adjusting the drive frequency in response to changes in load, such as variations in part size, material composition, or basket placement. These innovations contribute to energy efficiency, extend equipment longevity, and enhance the overall reliability of industrial ultrasonic cleaning processes.
As you select or specify an ultrasonic cleaning generator for your facility, consider options such as programmable controls, timer settings, power modulation, and frequency adjustment. These features allow you to tailor the cleaning process to diverse contaminants, part geometries, and precision cleaning requirements—expanding your capabilities for everything from industrial degreasing to fine electronics cleaning.
The cleaning tank is the heart of an ultrasonic cleaning machine, designed to hold both the ultrasonic cleaning solution and the items undergoing cleaning or degreasing. Tanks are almost universally constructed from durable stainless steel to withstand prolonged exposure to aggressive cavitation forces and the wide variety of aqueous detergents, degreasers, enzymatic solutions, and solvent-based cleaning concentrates used in ultrasonic cleaning. High-quality tanks feature advanced surface finishing methods, such as electropolishing for corrosion and erosion resistance, and optional titanium nitride (TiN) coatings applied via physical vapor deposition (PVD) to further increase service life and compatibility with specialty chemicals.
When choosing a tank, it is crucial to match tank size, volume, and configuration with your typical workload and application—whether you are cleaning large automotive engine parts, surgical instruments, or fine jewelry. Some advanced industrial ultrasonic cleaning systems include filtering and recirculation systems, automatic fill and drain controls, and programmable solution heaters. Using the correct ultrasonic cleaning solution formulated for your contaminants and substrate materials is also essential; specialized chemicals can dramatically improve cleaning effectiveness and ensure compatibility with sensitive parts.
To optimize the ultrasonic cleaning process and prevent direct contact between workpieces and the tank floor, stainless steel strainer baskets or mesh baskets are standard in most setups. Positioning items centrally within the ultrasonic cleaning bath ensures uniform exposure to ultrasonic waves and cavitation, resulting in comprehensive, damage-free cleaning even for fragile parts such as dental instruments, laboratory glassware, or intricate electronic assemblies. Baskets prevent larger items from impeding transducer function and small components from being lost, while maintaining maximal fluid circulation and acoustic wave propagation.
When selecting a workpiece basket, consider mesh size, load capacity, and chemical compatibility. Proper basket use helps avoid damage, increases ultrasonic cavitation effectiveness, and supports consistent cleaning outcomes, especially for delicate or large-batch cleaning operations.
Integrated heating elements play a pivotal role in ultrasonic cleaning systems by maintaining the optimal cleaning temperature in the solution. The correct temperature accelerates the cavitation process, enhances detergent chemical action, and speeds the removal of challenging soils such as oil, grease, wax, and biological contamination from precision components. However, temperature control is essential to avoid damaging temperature-sensitive materials or degrading advanced cleaning additives. Most professional ultrasonic cleaning machines offer programmable thermostatic control, enabling precise adjustment of setpoint temperature for different cleaning tasks, from heavy-duty degreasing to gentle laboratory sample preparation.
In summary, understanding each component—from ultrasonic transducers and generators to tanks, baskets, and heating systems—is critical when evaluating, purchasing, or maintaining an ultrasonic cleaning machine. Selecting the right configuration and features ensures effective, efficient, and reliable ultrasonic cleaning results for various industries, including electronics, healthcare, automotive, and manufacturing.
Understanding how to optimize the cleaning process in an ultrasonic cleaning machine is key to achieving superior results and efficiency. The overall cleanliness, speed, and safety of ultrasonic cleaning depend on several crucial factors that influence both ultrasonic cavitation and the removal of contaminants from different surfaces. Each variable—from cleaning chemistry to bath temperature and ultrasonic frequency—affects how effectively an ultrasonic cleaner removes dirt, oils, and debris from delicate or complex parts. Mastery of these process variables not only improves ultrasonic cleaning performance but also maximizes equipment longevity. Below, explore the essential considerations that regulate ultrasonic cleaning success and how they impact both industrial and precision cleaning applications.
The choice of cleaning solution is fundamental to effective ultrasonic cleaning. The physical and chemical properties of the cleaning solution greatly influence the propagation of ultrasonic waves, the formation of cavitation bubbles, and the overall cleaning efficiency. Selecting the ideal cleaning chemistry ensures not only contaminant removal but also safety and compatibility with the items being cleaned. Key parameters to evaluate include:
Vapor Pressure: In ultrasonic fluid handling, especially within pumps, the vapor pressure of the cleaning liquid dictates how easily cavitation forms. When local pressure drops below this threshold, vapor bubbles form and implode, helping dislodge contaminants from intricate surfaces. Liquids with moderate vapor pressure are best—they provide effective cavitation energy without excessive power requirements, ensuring energy-efficient operation and enhanced soil removal.
Surface Tension: Surface tension controls how the solution interacts with different surfaces, impacting how well it penetrates crevices and complex geometries. Optimal surface tension allows the cleaning liquid to reach microscopic gaps and remove fine debris, which is essential in high-precision industries such as medical device cleaning and electronics. Surfactants can be added to reduce surface tension and improve wetting action.
When selecting a cleaning solution, always consider the material compatibility, contaminant type, and required cleanliness levels—especially for sensitive components such as circuit boards, optical lenses, surgical instruments, and automotive parts.
Controlling bath temperature is a vital factor in optimizing ultrasonic cleaning equipment. As the temperature increases, physical properties like vapor pressure, surface tension, and viscosity shift to enhance cavitation activity within the ultrasonic bath. Generally, an elevated temperature improves detergent action, allows for faster contaminant emulsification, and boosts removal of tough residues including greases, oils, and fluxes. For most aqueous ultrasonic cleaning applications, bath temperatures between 50°C and 70°C are recommended for maximum cleaning efficiency, although the optimal temperature may vary by cleaning chemistry and part material. Incorporating precise temperature controls into your ultrasonic cleaning system empowers you to address challenging cleaning tasks in industries such as aerospace, medical device reprocessing, and manufacturing.
The composition of your cleaning chemistry is pivotal to the end result. In ultrasonic cleaning tanks, water is the most popular base solvent, prized for its safe handling, affordability, and compatibility with both organic and inorganic contaminants. However, tailored solutions using alkaline detergents (for oils, greases, and organic soils), acidic solutions (for scale or oxide removal), enzymatic cleaners (for protein-based soils and biological residues), and specialty agents (for industry-specific contaminant profiles) are available. Each additive can modify pH, chelate ions, alter surface tension, or boost soil-suspending capabilities. Carefully match your cleaning solution to the specific contaminants and part materials—using the wrong chemistry may damage delicate items or leave unwanted residues. Always refer to the ultrasonic cleaner’s manufacturer recommendations and Material Safety Data Sheets (MSDS) to ensure operator safety and compliance.
Advanced systems may employ multi-stage ultrasonic cleaning processes—utilizing initial washing, intermediate rinses, and final passivation protocols. These multi-step systems address the strict cleanliness requirements of sectors such as semiconductor manufacturing, ophthalmic lens cleaning, jewelry cleaning, and laboratory decontamination.
The presence of dissolved air or gases in the cleaning liquid can dramatically reduce cleaning efficiency in ultrasonic tanks. These gases cushion cavitation bubble implosions, diminishing the mechanical energy released and weakening the acoustic scrubbing effect. To achieve optimal performance, degassing procedures are critical: operate the ultrasonic unit without parts for several minutes, allowing coalescence and release of trapped gases. Dedicated degassing cycles or built-in features in industrial ultrasonic cleaners further accelerate this process, shortening setup time while ensuring maximum cleaning power for delicate assemblies and high-precision components.
Regular degassing is essential in applications with very fine contaminants or in environments demanding flawless results, such as laboratory glassware cleaning, dental instrument sterilization, and the restoration of antique jewelry or precious metals.
The selected frequency in an ultrasonic cleaning machine directly determines the size and strength of cavitation bubbles formed, as well as how effectively contaminants are removed from part surfaces. Frequency ranges are tailored to material type, sensitivity, and the type of debris being cleaned. For example:
By matching frequency to the component and soil profile, you optimize cleaning results while minimizing the risk of material erosion or unwanted alterations—a critical consideration in manufacturing, restoration, and laboratory environments.
Effective ultrasonic cleaning depends on delivering sufficient energy (measured in watts per gallon or liter) to generate robust cavitation throughout the cleaning bath. Standard ultrasonic generator power density is approximately 100 watts per gallon, but power requirements vary based on tank size, part complexity, and level of contamination. Too low a power density may lead to inconsistent results, while excessive power could damage sensitive items. Modern ultrasonic cleaning systems offer adjustable power settings or pulse features, allowing you to fine-tune cleaning intensity for specific applications—from heavy-duty industrial degreasing to fine jewelry cleaning.
In summary, optimizing ultrasonic cleaning effectiveness involves a careful balance of solution chemistry, bath temperature, degassing, frequency selection, and power density. Coordinating these variables ensures consistent removal of a wide range of contaminants, promotes workplace safety, and drives cost-effective maintenance—making ultrasonic cleaners a top choice in commercial, industrial, and laboratory cleaning processes.
Ultrasonic cleaning uses ultrasonic sound waves, typically starting at 20 kHz, to produce cavitation in a cleaning solution. This action generates microscopic bubbles that collapse and remove contaminants from surfaces, delivering comprehensive cleaning even in intricate part geometries.
An ultrasonic cleaning machine consists of key components including ultrasonic transducers, an ultrasonic generator, a stainless steel cleaning tank, a workpiece basket or strainer, and a programmable heating element for temperature control.
Piezoelectric transducers convert alternating current into mechanical vibrations using crystals, offering high efficiency. Magnetostrictive transducers use magnetic fields and ferromagnetic materials for durability and reliability, with slightly lower efficiency but long-term robustness for heavy-duty cleaning.
Key factors include cleaning solution properties (vapor pressure, surface tension, viscosity, and density), bath temperature, solution chemistry, presence of dissolved gas, ultrasonic frequency, and power density. Adjusting these ensures optimal contaminant removal and efficiency.
High-frequency ultrasonic cleaning (above 80 kHz) produces smaller, gentler cavitation bubbles, ideal for sensitive items like circuit boards, optics, and jewelry. Proper basket selection and uniform exposure prevent surface damage and ensure thorough yet gentle cleaning.
Match tank size, transducer type, generator features, and chemical compatibility with workload and contaminants. Advanced options like frequency sweep, programmable controls, and recirculation systems maximize efficiency for industrial, automotive, or medical applications.
This chapter covered various types of cleaning machines based on their form and construction. These machines operate at different frequency ranges and utilize various cleaning solutions. Here are the three main types discussed.
Single-tank Ultrasonic Cleaners: Single-tank ultrasonic cleaners are standalone machines suitable for cleaning small to medium-sized parts. More advanced designs use single tanks that have multiple functions by combining cleaning, rinsing, and drying steps. Small scale applications such as jewelry, laboratory equipment, and surgical equipment cleaning only need a cleaning tank. Rinsing may be done through a separate, ordinary water bath, while drying is done by ambient air.
Multiple-tank Ultrasonic Cleaners: This type has separate tanks for the different steps of the cleaning process. The most common is having a three-tank system in which each tank is a station that performs either cleaning, rinsing, or drying. For production lines with higher throughput, multiple cleaning tanks are employed. Multiple cleaning tank systems can have pre-wash stages to remove loose debris, while other tanks perform ultrasonic cleaning. Fully automatic systems also use gantry robots to pick and carry the baskets containing the parts. The gantry lowers the basket into a tank for a specific amount of time, then transfers the basket onto the next station.
Immersible Ultrasonic Cleaners: Immersible (submersible) ultrasonic cleaners are detached ultrasonic transducers and generator systems that are used for new cleaning systems to add an ultrasonic cleaning function, or for retrofitting existing ultrasonic cleaning systems to improve cleaning performance. Immersible transducers can be submerged at the sides or bottom of the tank. The drop-in location depends on the load, geometry of the tank, and the volume of liquid solution. This type of ultrasonic cleaner is highly versatile since more transducers can be added which can be added at different locations. Also, the transducers can be transferred from one tank to another.
Ultrasonic Rod Transducers: Ultrasonic rod transducers have a single piezo element that creates ultrasonic vibrations in a cylindrical tube, a design that allows the ultrasonic waves to radiate in all directions from the source. When an ultrasonic rod transducer is placed in a tank, the surface area of every item is exposed to the cleaning process without any dead spots.
The power output of an ultrasonic rod transducer is up to 2 kW, with different lengths to fit the needs of any type of industrial cleaning. The single-point attachment of an ultrasonic rod transducer makes it possible to use them in closed systems, chamber systems, or open cleaning tanks with the capability of being adapted to vacuum cleaning processes and positive pressure processes at temperatures of up to 203 °F (95 °C) with short cleaning cycles. To meet the demands and requirements of modern cleaning operations, ultrasonic rod transducers are made of various materials, including stainless steel, titanium aluminum, and pure titanium.
Although an ultrasonic rod transducer's multidirectional attribute is ideal, the design has advantages beyond that single feature. They can be used to clean cylindrical surfaces and are well-suited for applications where debris breakdown is required.
Unlike dual-head transducer systems, single piezo crystals in ultrasonic rod transducers are easily replaced, which means less maintenance and longer use of the transducer.
The versatility of ultrasonic cleaners is enhanced by the variety of detergents used in the cleaning process, ranging from acidic to highly alkaline solutions. Understanding the different types of detergents helps prevent cleaning errors and avoids the removal of crucial components like waxes, lacquers, coatings, and anti-corrosion layers. Choosing the right detergent is a critical aspect of ultrasonic cleaning that requires careful attention.
Alkaline Solutions: Alkaline solutions can be used with a wide range of temperatures to remove salts, oxides, organic soils, metal chips, and grease. They have a pH of 10 or higher and contain caustic soda according to the required cleaning strength. Moderate alkaline solutions are used for cleaning metals, ceramics, glass, and most plastics.
The use of alkaline solutions is due to their effectiveness in removing organic contaminants such as oil, grease, and waxes. Oils do not easily dissolve in water due to surface tension. A component of alkaline detergents, a wetting agent, reduces the water's surface tension, enabling oils to be dissolved. Stronger alkaline solutions convert oils into soap to make them soluble in water.
When selecting an ultrasonic cleaning solution, the initial step is to consider the industry in which the detergent will be used and the specific components that need cleaning. While many manufacturers offer general-purpose detergents suitable for various ultrasonic cleaners, it’s crucial to ensure that the chosen detergent is compatible with the composition and structure of the items being cleaned. As with any cleaning solution, it is essential to review the guidelines and chemical composition of the detergent before making a final choice.
An ultrasonic cleaner is a type of sonic cleaner or sonic cleaning machine that uses cavitation to remove unwanted material. The cleaning effect is created by the compression and refraction of a cleaning medium. Miniscule vibrations propagate throughout the...
Industries worldwide utilize abrasive blasting for various purposes, including cleaning rust and oil, removing surface coatings like paint and pollutants, preparing surfaces for paint and coatings, reinforcing metal surfaces and...
An aqueous part washer is an automated or semi-automated machine manufactured to clean, remove tough grease, and dry large or small parts before distribution or surface treatment. The washing is necessary since...
Automated parts washers are mechanical devices designed to efficiently remove grit, oil, grime, dirt, paint and other contaminating substances from parts with minimum manual supervision. These substances are removed...
Deburring is a secondary operation of a machining process that enhances the final quality of the product by removing raised edges and unwanted pieces of material, known as burrs, left by the initial...
Finishing machines are machines used for metal finishing, which is the last stage of the metal fabrication process; the stage encompasses the use of machines in finishing the metal surface...
A parts cleaner is a cleaning device that uses various types of solvents, cleaning agents, and processes to remove grease, grime, and contaminating materials from manufactured parts prior to shipment or movement for further processing...
A parts washer is a mechanical device designed to remove grit, grime, oil, miscellaneous debris, dirt, paint, and other contaminating substances from parts in preparation for their use in assembly operations, packaging, or coating...
Sandblast cabinets include systems or machinery and components for projecting blast media against a part‘s surface to abrade, clean, or modify the surface. Sand, abrasive, metal shot, and other blast media are driven or propelled using pressurized water, compressed air, or a blast wheel...
Sandblasting equipment includes systems or machinery, and components for projecting blast media against a part‘s surface to abrade, clean, or modify the surface. Sand, abrasive, metal shot, and other blast media are driven or propelled using pressurized water, compressed air, or a blast wheel...
Shot peening equipment includes systems or machinery and components for projecting shot peening media against a part‘s surface to modify the surface or surface engineer the part...
A tumbling machine is a durable deburring and metal-polishing machine designed for finishing large parts or batches of smaller parts. A tumbling machine is also known as a barreling machine or a mass-finishing...
Vibratory tumbler is the equipment used in a vibratory finishing process, one of the most common methods in mass finishing. But how does a vibratory tumbler work...
A wastewater evaporator is a method of removing water from water-based waste by converting the water in the waste to a vapor and leaving contaminants. The function of a wastewater evaporator is to reduce the volume of waste materials...
Parts washers are designed for cleaning, degreasing of equipment, and drying of mass quantities of small or large parts in preparation for surface treatment, assembly, inspection, or shipment...