This article will take an in-depth look at compression springs.
The article will look at topics such as:
This chapter delves into the fundamentals of compression springs and outlines crucial considerations for selecting the right type.
Coil springs, known as compression springs, serve as energy storage mechanisms when compressed. These helical, open-coiled springs resist compressive forces and, when compressed, shorten to absorb substantial potential energy.
Upon reduction or removal of the load, compression springs regain their initial shape and length due to the energy storage. When loaded, the springs become more compact, differing from extension springs where non-stressed coils remain uncontacted.
For designers and engineers, understanding spring mechanics, particularly Hooke's Law, is critical, as it dictates that deformation force is proportional to deformation amount. This principle applies to the need for increased force when compressing a spring.
The spring constant, indicated in Newtons per meter or pounds per inch, dictates the deformation force needed. A higher constant implies a stiffer spring. It is influenced by wire diameter, coil diameter, free length, and number of active coils.
Comprehending the spring constant is vital for manufacturers to achieve optimal spring performance. If the constant is overly high or the wire excessively slender, the spring risks failure. Precision in large-scale spring manufacturing ensures stability and prevents damage due to carefully calibrated spring coiling machines.
When selecting compression springs, consider various factors:
Compression springs feature diverse end types that are standard or custom-designed, such as open, closed, ground, and ungrouded ends. These configurations can impact the spring rate, despite constant factors like wire size, coil count, and outer diameter (OD).
Closed-end compression springs stand upright on flat surfaces due to closed terminal coils, favored for their simplicity and cost efficiency, as they demand less processing. For springs with high slenderness ratios, additional rod or shaft support may be necessary.
Ground end compression springs, a variant of closed-end springs, have precisely ground ends to align with spring dimensions. This precision comes with increased production time and costs. The ground ends ensure proper slenderness ratios, allowing effective operation without extra rod or shaft support.
Double closed end compression springs boast two closed terminals, similar to closed and squared ends. Produced akin to extension and torsion springs, all coils are in contact. These ends enhance stability, offering higher slenderness ratios, necessitating reinforced ends to prevent buckling, often at lower costs than their closed or ground counterparts.
Open end compression springs are less common due to stability concerns without rod or shaft support. With open and spaced coils, these springs suit applications prioritizing minimized solid height.
Paired with closed ends, open ends enhance load distribution and mitigate buckling risks. Ground ends, however, increase manufacturing costs due to additional processing.
Not all producers carry closed and ground ends as standard inventory, an essential distinction. Custom end varieties may include expanded coils for ring grooves, offset legs for alignment, or reduced coils for screw attachment.
Popular spring materials include carbon steel and exotic alloys. Music wire, high carbon steel, is commonly used, while stainless steel 302, though less strong, offers superior corrosion resistance.
Nickel alloys are selected for extreme temperature tolerance, corrosive resistance, and non-magnetic properties, available under various brand names. Copper alloys, such as phosphor bronze and beryllium copper, are prized for excellent electrical conductivity and corrosion resistance.
Outer Diameter (OD): For springs inserted into holes, consider the outer diameter. If surrounded by internal components, measure their dimensions. OD expands under compression, essential to consider if used in tubes or bores. The OD measures across the outer coil edges.
Manufacturing processes can restrict spring OD, impacting required assembly space. Manufacturers offer work-in-hole diameters based on anticipated OD expansion and tolerances, crucial when ordering custom springs or choosing from catalogs.
Inner Diameter (ID): For springs fitting over shafts or mandrels, account for the inner diameter. A minimum clearance of ten-thousandths of an inch prevents friction. The ID calculates by deducting twice the wire diameter from the OD.
Free Length: Ensure the spring's free length exceeds available space for a preloaded state, maintaining position. Free Length, the spring length without compression or force, measures from end to end or tip to tip.
Solid Height: Wire diameter and total coil count dictate solid height, crucial to ensure loaded heights do not exceed or undercut the solid height.
Environmental factors, temperature, and moisture exposure influence spring performance. Costlier materials withstand higher temperatures, increasing spring expenses.
Spring Pitch: Pitch refers to space between adjacent coils, from center to center. Calculate by measuring coil gaps and adding wire thickness.
Active Coils: These are the coils in compression springs that compress and deflect under load, contributing to the spring's movement.
Total Coils: This includes both active coils and non-deflecting, closed coils devoid of pitch.
Noting total and active coil counts is important. Closed or ground-end springs have inactive ends, whereas open-end springs boast fully engaged active coils.
Considering a spring's load or travel is imperative. The spring rate or spring constant indicates necessary compression force per unit length, typically in pounds per inch (lbs/in). Designers use this to anticipate spring travel under loads. Advanced compression adds stress, potentially leading to spring set, affecting original length recovery post-load, though they may still operate based on application.
Appropriate wire diameter and material selection is vital to align with load, travel, and environment requirements. The Rockwell scale gauges wire hardness, providing insights into its flexibility and rigidity. This assessment measures indents from a specific load, elucidating durability and stress performance.
| Compression Spring Wire Diameters | ||||
|---|---|---|---|---|
| Music Wire and Stainless Steel Wire Diameters | Chrome Silicone Wire Diameters | |||
| English Units | Metric Units | English Units | Metric Units | |
| 0.008 in | 0.203 mm | 0.08 in | 2.032 mm | |
| 0.009 in | 0.229 mm | 0.091 in | 2.311 mm | |
| 0.010 in | 0.254 mm | 0.098 in | 2.489 mm | |
| 0.011 in | 0.279 mm | 0.105 in | 2.667 mm | |
| 0.012 in | 0.305 mm | 0.118 in | 2.997 mm | |
| 0.013 in | 0.330 mm | 0.125 in | 3.175 mm | |
| 0.014 in | 0.356 mm | 0.135 in | 3.429 mm | |
| 0.015 in | 0.381 mm | 0.148 in | 3.759 mm | |
| 0.016 in | 0.406 mm | Up To | ||
| 0.017 in | 0.432 mm | 0.162 in | 4.115 mm | |
| 0.018 in | 0.457 mm | 0.172 in | 4.369 mm | |
| 0.019 in | 0.483 mm | 0.187 in | 4.750 mm | |
| 0.02 in | 0.508 mm | 0.312 in | 7.925 mm | |
| 0.021 in | 0.533 mm | 0.343 in | 8.712 mm | |
| Up To | 0.375 in | 9.525 mm | ||
| 0.362 in | 9.195 mm | 0.394 in | 10.008 mm | |
| 0.375 in | 9.525 mm | 0.406 in | 10.312 mm | |
| 0.394 in | 10.008 mm | 0.437 in | 11.100 mm | |
| 0.437 in | 11.100 mm | 0.453 in | 11.506 mm | |
| 0.453 in | 11.506 mm | 0.468 in | 11.887 mm | |
| 0.468 in | 11.887 mm | 0.5 in | 12.700 mm | |
| 0.5 in | 12.700 mm | 0.532 in | 13.513 mm | |
| 0.562 in | 14.275 mm | 0.562 in | 14.275 mm | |
| 0.625 in | 15.875 mm | 0.625 in | 15.875 mm | |
This chapter explores the full range of manufacturing techniques and processes used in the production of compression springs, as well as the selection and characteristics of materials that ensure optimal spring performance. Understanding these details is critical when sourcing or specifying compression springs for engineering, mechanical, or industrial applications.
The production of compression springs relies on advanced manufacturing methods and precise engineering processes designed to meet specific technical requirements such as load capacity, spring rate, and environmental durability. The most common manufacturing processes include:
Coiling is a foundational step in fabricating compression springs, where high-strength spring wire is straightened to improve uniformity and accuracy. Wire is fed into CNC coilers equipped with programmable controls, allowing precise adjustments for the compression spring's free length, coil diameter, pitch, and number of active coils. These factors directly impact the spring's compression force and functionality. Modern coiling machines often use high-resolution cameras and laser micrometers for real-time quality assurance, ensuring that the spring meets stringent dimensional tolerances and customer specifications. After the coiling operation, the spring is cut from the wire and prepared for subsequent heat treatment and surface finishing.
During the coiling process, spring wire experiences significant internal stresses and strain, which, if not addressed, can lead to brittleness, deformation, or failure during use. To combat this, springs are subjected to a stress-relief heat treatment—typically in a controlled-atmosphere oven—where temperatures and holding times are carefully regulated. This process allows the metal’s microstructure to relax, forming stronger metallic bonds and stabilizing the spring’s geometry. Proper stress relieving enhances the spring's fatigue resistance and long-term durability, making the springs suitable for dynamic and cyclic loading conditions.
After heat treatment, compression springs may go through a variety of finishing operations to optimize their surface properties, corrosion resistance, and mechanical performance. These secondary processes can be tailored to the specific demands of each application. Key finishing steps include:
Compression springs can be manufactured from a wide range of spring materials, each chosen for its unique balance of fatigue strength, tensile strength, elasticity, and corrosion resistance. Proper material selection is essential for ensuring springs meet the mechanical demands and environmental factors of their intended application, minimizing the risk of spring failure and maximizing lifespan.
Among metallic materials, various grades of steel remain the industry standard for compression spring production. Common spring steels include stainless steel, carbon steel, high-carbon music wire, and hard-drawn steel. Each type of spring wire offers different performance characteristics:
Additional spring materials include chrome vanadium and chrome silicon steel alloys, which provide enhanced fatigue resistance, shock load tolerance, and high-temperature strength—making them the preferred choice for heavy-duty applications such as automotive suspension, aerospace, and industrial equipment. Non-ferrous metals like titanium, phosphor bronze, and beryllium copper are selected for specialty springs that require properties such as electrical conductivity, lightweight strength, or high corrosion resistance. Ceramics and high-performance plastics may also be used for springs in specific advanced engineering or high-temperature environments.
When designing a custom compression spring, engineers must consider both material choice and spring geometry—including wire diameter, coil diameter, and number of coils. Larger wire diameters yield greater load-bearing capacity, while reducing coil diameter increases overall spring stiffness. Improper selection of spring material or dimensions can lead to premature fatigue, breakage, or even failure of surrounding components, posing operational and safety concerns.
Whether selecting standard springs or requesting custom compression spring manufacturing, collaborating with experienced spring manufacturers ensures application-specific guidance on spring design, material choice, stress analysis, and finishing options to optimize compression spring performance and reliability in your project.
Compression springs are fundamental mechanical components that store and release energy by resisting compressive forces. These coil springs are widely used in manufacturing, engineering, automotive, aerospace, electronics, medical devices, and consumer products. Understanding the different types of compression springs is crucial for engineers, product designers, and procurement specialists looking to select the ideal spring configuration for specific applications. The main types of compression springs include:
Convex springs, often referred to as barrel-shaped springs, have a unique design where the coils are wider in the middle and taper towards the ends. This specialized coil geometry allows the coils to nestle into each other when compressed, reducing the solid height and increasing the spring’s travel capability. Specifically, in a convex spring, the outer diameters at the top and bottom are smaller compared to the diameter at the center. These springs are commonly used to produce linear force where space is limited and precise spring force is required.
Barrel springs are versatile and can be manufactured in various diameters, wire gauges, and materials, offering numerous design possibilities. They are often favored over standard compression springs due to their ability to save space, reduce buckling, minimize lateral movement, and adapt to different shapes to fit specific needs. These springs can be designed to either telescope or remain non-telescoping. In applications requiring enhanced stability, resistance to mechanical vibration, and precision under dynamic loads, manufacturers prefer convex springs. They are commonly utilized in industries such as toys, furniture, mechanical seals, valves, and the automotive sector for components like suspension systems and actuators.
Conical springs, shaped like a cone, have a diameter that tapers from one end to the other, with coils gradually decreasing in size along the length of the spring. This design allows for a progressive change in the coil diameter, enabling the coils to nest within each other. Such springs enhance stability while reducing the solid height. Some conical springs are designed to achieve a telescoping effect when compressed, where the tapered shape allows the coils to collapse into a smaller diameter, increasing the available travel or deflection. This makes them an ideal choice for applications requiring significant compression travel, minimal space, or high spring loads.
Conical springs offer enhanced stability compared to conventional compression springs. Their tapered design, with a larger outer diameter at the bottom, ensures improved stability, resistance to lateral deflection, and reduces the likelihood of buckling. This design helps maintain balance and consistent performance even under substantial axial compression. Conical compression springs are often used in electrical contacts, battery compartments, shock absorbers, and dynamic load applications where solid height and space constraints are a concern.
The image below illustrates a Belleville spring, which is characterized by its coned disk design. Invented by Julian Belleville and patented in France in 1867, this spring design is known for its high load-bearing capacity in a compact space. The spring's load-deflection characteristics vary depending on the (h/t) ratio, which determines its stiffness and compressive force capability. Belleville springs are widely used in applications such as plate clutches, brakes, pressure relief valves, vibration dampening, and various types of fastened connections that require precise preload or tension adjustment.
Here are some advantages of using Belleville springs:
Belleville disc springs are popular for critical applications in industrial machinery, bolted joint assemblies, power transmission, and heavy-duty equipment where consistent force and compensating for thermal expansion or relaxation is necessary.
Concave springs, also referred to as hourglass springs, feature a design where the coil diameter is reduced in the center compared to the ends. This symmetrical hourglass shape improves spring alignment, helping to maintain the spring's position and minimizing lateral movement or buckling under load. The broader end coils contribute to an uneven pressure distribution, enhancing overall stability and performance. Concave springs are available in various materials such as stainless steel, alloy steel, and corrosion-resistant metals, enabling them to be tailored for specialized applications—including precision instruments, vibration dampening, and shock absorption systems.
Compared to straight coil compression springs, concave springs offer space-saving benefits and are designed to operate in compact environments where side loading must be minimized. Their unique geometry makes them ideal as return springs, component separators, and in various control mechanisms within mechanical and electrical devices.
Straight coil compression springs, also called constant diameter or cylindrical springs, feature a uniform outer and inner diameter along their entire length. These are the most common type of compression spring and are characterized by a cylindrical coil geometry made from round, square, or rectangular wire profiles.
Each coil in a straight coil compression spring maintains a consistent diameter, ensuring uniform load distribution and predictable spring rate (spring constant). The ends of these springs can be ground (for stability on flat surfaces) or closed, offering a reliable 270° bearing surface. Their cylindrical form distinguishes them from tapered compression springs, which have a conical shape and variable coil diameters.
Straight coil compression springs are versatile, readily available in standard sizes and custom configurations, and widely utilized in automotive suspensions, industrial equipment, valve assemblies, pumps, and everyday consumer products like pens and electronics.
A volute spring features coils with a cone shape rather than a round, oval, or square cross-section. Much like a conical compression spring, it functions in a similar manner. Instead of being compressed into a smaller space, the cone shapes nestle over each other. As a result, a volute spring typically achieves a lower solid height compared to a non-conical compression spring of the same length. Volute springs are notable for their ability to absorb shock and withstand heavy loads in rugged environments.
Volute springs are often used in railway switches, heavy machinery, industrial presses, and agricultural equipment, where robust compression resistance and durability are required.
Variable pitch springs feature coils with varying spacing along their length, with some sections having wider gaps and others being more tightly wound. The term "pitch" refers to the distance between adjacent coils. In variable pitch springs, these intervals differ along the spring’s length, allowing for a range of performance characteristics and progressive compression rates.
Springs with a variable pitch are strategically engineered for applications that require variable force output during compression, such as automotive valve springs, safety devices, and dynamic systems where a progressive rate is essential to avoid surging or material fatigue. By altering the spring pitch, designers can optimize behavior under fluctuating loads and tailor the pressure curve to meet specific performance requirements.
Magazines utilize compression springs with oval or rectangular coils to propel cartridges or bullets into a handgun's chamber. These specialty compression springs must be produced with high precision, rigorous tolerances, and stringent quality standards. Various design options are available, including differences in length, coil count, wire diameter, and required spring force. Given that magazine springs often operate near their solid height and endure repetitive cycling, the spring rate, fatigue resistance, and material choice are critical factors in the design process.
Magazine springs are often made from high-carbon music wire or stainless steel to ensure longevity and reliable performance. Optimization of spring design is vital for feeding reliability, consistent force delivery, and easy maintenance in firearms and ammunition systems.
A torsion spring is a mechanical tool that stores and releases rotational energy. The torsion spring is attached to a mechanical part at each end. The winding of the spring is tightened and stores potential energy when it is turned around its axis at one end. As the other end is kept fixed, it is deflected about the body's centerline axis. The spring stores more potential energy as the winding becomes tighter and resists more rotating force. The spring will unwind as it performs an elastic rebound after being released, releasing the tensioned energy.
Torsion springs generate an equal and opposite rotational force (torque) at their ends, which can apply torque to the connected mechanical components. These precision springs are designed to hold mechanical parts statically in place or allow movement when a specific torque threshold is met. As the spring is twisted to tighten the winding, it faces more bending stress compared to rotational stress.
In contrast to compression and tension springs, which deal with linear and rotational forces, torsion springs are unique in that they operate solely under rotational forces. They rely on the material's elasticity to return to their original winding position after being twisted.
Torsion springs can exert force in either a clockwise or counterclockwise direction, depending on the direction of the twist. To achieve maximum force output, the spring should be twisted in the direction of its winding.
These specialized springs are utilized across various industries, including automotive (for trunk lids and hoods), aerospace, agriculture, door hinges, and electronic devices. Numerous variations exist to suit different applications, such as double torsion springs, leg configurations, and custom spring dimensions for advanced mechanical designs.
Tapered compression springs feature a cone-shaped design, with a larger outer diameter at the base and a smaller diameter at the top. This tapered form enhances stability, reducing the risk of buckling compared to standard compression springs. These springs are known for their low solid height, which improves stability and resistance to surging. The solid height of tapered compression springs can be as minimal as the diameter of a single wire. They are designed to resist compression forces and store energy when compressed.
Due to their excellent space efficiency and enhanced ability to withstand lateral forces, tapered compression springs are often chosen for applications in automotive engines (such as valve springs), power transmission, actuators, safety switches, and compact mechanical assemblies. Their progressive rate characteristics and customized end configurations make them a smart choice in dynamic systems requiring both stability and high-performance energy absorption.
Choosing the right type of compression spring is essential for optimizing performance, durability, and safety in your mechanical system. Consulting with experienced spring manufacturers can help you select the appropriate spring material, finish, and design for your unique requirements, ensuring reliability in demanding operational environments.
This chapter will explore the various applications and advantages of compression springs.
Compression springs are utilized in a variety of applications, including:
Pens: A compression spring can be observed by examining a ballpoint pen. This spring enables the pen to write while exposing the tip and then shields the tip inside the housing to prevent the ink from drying out. This makes it possible to use pens without cumbersome and easily lost caps.
Firearms: Whenever considering tension, consider compression springs. Take into account the strain needed to fire a bow and arrow. The crossbow is a much simpler weapon if the human component is replaced with a compression spring. Technological advancements continue with the modern semi-automatic handgun, which uses a compression spring to absorb the energy produced by recoil and then redirect it to advance the slide or bolt and reload the weapon for the subsequent shot.
The benefits of compression springs are as follows:
Putting a component back in the right position: Door latches on both automobiles and building doors are an additional advantage that demonstrates how frequently utilized and essential compression springs are. Imagine raising a handle to open a door to get the greatest understanding of how a spring operates. The lock mechanism's compression spring would restore it to the locked position if the motion was used without pulling the door open. The spring can be compressed by tugging or turning the device; if it retains its position, the spring will stay compressed; otherwise, it will latch once more.
The drawbacks of compression springs are as follows:
Typical issues related to compression springs include:
When one end of a helical spring is placed on a rigid support and the other end is abruptly loaded, the coils do not deflect evenly. This is because it takes time for the tension to propagate along the spring wire. Initially, the coils at the end closest to the applied load absorb most of the deflection before passing some of it to the adjacent coils. A compression wave travels through the spring towards the supported end and then reflects back to the deflected end. This behavior is similar to a disturbance traveling through a closed water body before returning to its origin. This compression wave can continue traveling along the spring. If the applied load varies and the intervals between load applications match the time it takes for the wave to travel from one end of the spring to the other, resonance occurs. This causes the coils to experience high strain and significant deflections, potentially leading to the spring's failure. This phenomenon is known as surge.
The following methods can be employed to prevent spring surge:
Experimental data suggest that when the free length of a spring (LF) exceeds four times its mean or pitch diameter (D), the spring acts like a column and may buckle under relatively low loads. The following formula can be used to calculate the critical axial load (Wcr) that leads to buckling.
To prevent buckling, consider the following measures:
Compression springs can store mechanical energy when they are compressed. These open-coiled, helical springs provide resistance to compressive loading. When these springs are subjected to a compression load, they compress, grow shorter, and absorb a large amount of potential force. The springs are forced back to their original lengths and forms after the load is reduced or eliminated by the stored energy.
Thus, the selection of compression springs has to be made in consideration of the intended application, characteristics, benefits, and disadvantages of compression springs.
A coil spring is an elastic element made of metal or heavy plastic in the form of curls or ringlets of round wire or cord that is wrapped around a cylinder. The winding of a coil spring can be loose or tight in a helical shape depending on the application for which it is made...
Extension springs are helical wound springs that are so closely coiled together to create initial tension in the coils. This initial tension creates resistance against the force applied to its ends for extension. The initial tension helps determine how closely and...
Springs are a flexible machine element that store mechanical energy when subjected to tensile, compressive, bending, or torsional forces. When the spring is deflected, it stores energy and at the same time exerts an opposing force...
A torsion spring is a mechanical device that stores and releases rotational energy. Each end of the torsion spring is connected to a mechanical component. As the spring is rotated around its axis on one end, the winding of the spring is tightened and stores potential energy...
Wire mesh is fabricated by the intertwining, weaving, or welding of wires of various thicknesses to create proportionally equal parallel rows and intersecting columns. Also known as wire fabric, wire cloth, or...
Contract manufacturing is a business model in which a company hires a contract manufacturer to produce its products or components of its products. It is a strategic action widely adopted by companies to save extensive resources and...
Hardware cloth is a woven mesh made by interlacing various sizes of wire to form a metal fabric that can be used for animal cages, fence material, strainers, and filtering screens. The differences between the various types of hardware cloth...
The phrase "wire mesh" describes two- or three-dimensional structures constructed of two or more metallic wires connected by various techniques. In a wide range of settings, wire mesh products are...
Welded wire mesh is a series of wires that are welded where the individual wires cross. The openings of the mesh varies depending on the type of wire used and the function of the mesh. Regardless of size and wire, welded wire mesh is permanent and...
Wire baskets are made from a series of wires that are woven together or welded to form a shape of a basket. They can also be defined as containers that are made by use of an openwork pattern of metal...
Wire cloth is a woven (or nonwoven) sheet or web material with a series of openings across the surface. Wire cloth is also known as: Metal Fabric or Metal Cloth; Wire Mesh, Metal Mesh, or Alloy Mesh...
Wire shaping is a complex method that encompasses a wide range of dimensions, forms, and textures. The technique of creating a usable product by wire bending and shaping is known as custom wire forms...
Wire forming is a method for applying force to change the contour of wire by bending, swaging, piercing, chamfering, shearing, or other techniques. The various techniques for wire forming can produce any type of shape, form, or configuration...
A wire handle is attached to a bucket, pail, or other type of container to make it easy to lift the container and transport it. They are made of durable and sturdy metals capable of lifting several pounds...
A wire rack is a level wire form utilized to stock and exhibit a number of products, usually retail. The bottom surface on which such goods are stored is made of several latticed or interlaced metal strands...