This article will take an in-depth look at Open Loop and Closed Loop Cooling Towers.
The article will bring more understanding on topics such as:
This section will explore the functioning of both Open Loop and Closed Loop Cooling Towers.
An open loop cooling tower is a system where the water being cooled comes into direct contact with the surrounding air to dissipate heat.
An open loop cooling tower utilizes direct interaction with the air to lower the temperature of the water. Functioning as a type of heat exchanger, it facilitates partial heat transfer through the exchange between air and water. Additionally, cooling is achieved through the evaporation of a small portion of water, enabling the system to reach temperatures below the surrounding ambient conditions.
In the cooling tower, the water that needs to be cooled is introduced at the top. It is dispersed over the tower's packing through nozzles, creating a thin, uniform film across the packing material. This design increases the contact area significantly, enhancing the heat exchange process.
The fan either blows or pulls ambient air through the packing, depending on its design. This air cools the water through two main mechanisms: convection, where the heat is transferred from the warm water to the cooler air, and evaporation, which primarily reduces the water temperature. The moist air is then expelled from the top of the cooling tower. Meanwhile, the cooled water collects in a basin below for reuse in industrial processes. Drop eliminators positioned above the nozzles ensure that water droplets do not escape the cooling tower.
Closed Loop Cooling Towers are heat dissipation systems where the water being cooled never directly interacts with the air inside the cooling tower. Instead, the system operates in a closed loop, keeping the water separate from the air.
Closed loop cooling towers use an extra heat exchanger to manage heat transfer, unlike open loop systems where the water and air come into direct contact. Additionally, some cooling towers incorporate piping and plate heat exchangers to facilitate this process.
Closed loop cooling towers are similar and yet differ from open loop cooling towers. When there can’t be direct contact between the water that needs to be cooled down and the air (e.g. in food industries), it is necessary to employ a heat exchanger. The heat exchanger separates the processed water to be cooled down from the cooling tower’s evaporation water. This prevents the processed water from getting into contact with the air. In closed loop cooling towers, it might be necessary to use antifreeze, whereas in open loop cooling towers antifreeze is unnecessary.
The water needing cooling passes through a heat exchanger, which is constructed from stainless-steel plates and located in a separate room adjacent to the cooling tower. Within this heat exchanger, heat is transferred from the process water to the cooling water. As a result, the process water is cooled and can be reused, creating a closed-loop system where cooling water circulates between the heat exchanger and various users like condensers and production equipment.
Once the reheated water exits the plate heat exchanger, it is channeled via piping to the top of the cooling tower. The water is then spread over the tower packing by nozzles. As it descends through the packing, it cools and collects in a basin. From there, it is pumped back to the heat exchanger for reuse. In the heat exchanger, the water is cooled by air that flows in countercurrent through the tower. This air absorbs heat and becomes saturated before being expelled through the tower’s top. Drop eliminators above the nozzles prevent water droplets from escaping the cooling tower.
The efficiency of open loop and closed loop cooling towers can be influenced by several factors, such as:
The range refers to the temperature difference between the incoming hot water and the outgoing cold water at the cooling tower. For example, if hot water enters at 100°C and needs to be cooled to 80°C, the range is 20°C. Increasing the range can help lower both the initial investment and operating costs of the cooling tower.
The heat load of a cooling tower is influenced by the specific process it supports. The required level of cooling is dictated by the target operating temperature. Generally, a lower operating temperature is preferred to enhance process efficiency or improve the quality and quantity of the product. Conversely, higher temperatures may be beneficial for certain applications, such as in internal combustion engines. An increased heat load necessitates a larger and more expensive cooling tower. While process heat loads can be challenging to measure accurately due to their variability, heat loads in refrigeration and air conditioning are typically easier to quantify with precision.
The wet-bulb temperature indicates the local temperature conditions by using a thermometer with its bulb wrapped in a moist cloth. This reading is compared to the 'dry bulb' temperature (DBT), which is taken from a thermometer with a dry bulb. By comparing these two readings, and referring to a psychrometric chart or air properties table, the relative humidity can be calculated. Typically, the wet-bulb temperature is lower than the dry-bulb temperature, except when the air is fully saturated with water, known as 100% relative humidity. In such cases, the wet-bulb and dry-bulb temperatures are the same.
A cooling tower cannot reduce the temperature of the hot process water below the wet-bulb temperature of the incoming air, which also represents the dew point of the air. It is not feasible to design a cooling tower that cools water to a temperature equal to or lower than the ambient wet-bulb temperature. Each cooling tower must be tailored to the specific wet-bulb temperatures experienced in its location during summer. High-efficiency mechanical draft towers can typically lower water temperatures to within 5 to 6°F of the wet-bulb temperature, while natural draft towers usually achieve temperatures within 10 to 12°F of the wet-bulb temperature.
Typically, it is assumed that the wet-bulb temperature of the ambient air reflects the temperature of the air entering the cooling tower. However, this assumption holds true only if the cooling tower is positioned away from any heat sources that might elevate the local temperature. Ideally, the ambient wet-bulb temperature should be measured from 50 to 100 feet upwind of the tower, at a height of 5 feet above the base of the tower, without any interference from nearby heat sources. In practice, very few cooling tower setups meet this precise criterion.
The term "approach" refers to the difference between the temperature of the water exiting the cooling tower and the wet-bulb temperature of the incoming air. To determine the approach, subtract the wet-bulb temperature of the ambient air from the temperature of the water leaving the tower. For example, if a cooling tower produces water at 86°F while the wet-bulb temperature is 79°F, the approach is 7°F.
Approach is a key performance indicator for a cooling tower, as it sets a limit on how low the temperature of the outgoing cold water can be, independent of the tower's size, heat load, or range. The temperature of the water cannot fall below the wet-bulb temperature of the surrounding air. When the wet-bulb temperature drops, the temperature of the water leaving the cooling tower will also decrease proportionally, provided that the flow and range remain constant. Typically, the approach temperature ranges from 5 to 20°F, meaning that the outgoing cold water temperature will always be 5 to 20°F higher than the ambient wet-bulb temperature, regardless of the cooling tower's capacity or heat load.
Reducing the approach temperature requires a significantly larger cooling tower, with the size increasing exponentially as the approach decreases. Cooling towers with an approach below 5°F are generally not cost-effective, and manufacturers typically do not guarantee performance for approaches lower than this threshold.
Approach is calculated using the formula: Approach = CWT - WBT, where CWT represents the temperature of the cold water and WBT denotes the wet-bulb temperature.
Range is determined by the formula: Range = HWT - CWT, where HWT stands for the temperature of the hot water and CWT represents the cold water temperature.
To calculate cooling tower efficiency, use the formula: Efficiency = (Range / (Range + Approach)) * 100.
This section will cover the various components of both open loop and closed loop cooling towers and explain their respective functions.
Most open loop and closed loop cooling towers consist of the following instrumentation systems: blow down rate; flow meters for cooling tower makeup water; water level switches for hot and cold water basins; vibration switches; high and low level switches; thermocouples for the measurement of the temperature of hot and cold water; and high and low oil level switches.
In refinery and petrochemical cooling tower applications, explosion-proof fan motors are essential because of the risk of leaks from heat exchangers. Additionally, these motors need to be equipped with protective systems, including overload relays and earth fault relays, to ensure safety and reliability.
Cooling tower nozzles are typically crafted from various plastics, such as polypropylene, ABS, PVC, and glass-filled nylon. These nozzles are designed to evenly distribute hot water throughout the cooling tower's cell.
These valves control the flow of hot water to ensure it is distributed evenly within the cells. They are designed to withstand harsh, corrosive conditions.
They deliver power from the motor’s output shaft to the input shaft of the gear reduction unit.
They reduce the magnitude of the speed depending on the requirements of the cooling tower. The gear reducer, motor and driveshaft are permanently alighted by the torque tube.
Cooling tower louvers, typically constructed from asbestos sheets, serve two main purposes: (i) to prevent the loss of circulating water within the tower, and (ii) to evenly distribute the airflow into the fill media.
This serves as a support structure for the fan cylinders and offers easy access to both the fan and the water distribution system.
It must either be buried underground or properly supported on the ground to avoid thrust loading on the cooling tower. This thrust loading is due to the pressure exerted by the water in the pipe and the weight of the pipe itself.
Cooling tower fans are crucial components in both open loop and closed loop systems. Common materials used for these fans include fiberglass, hot-dipped galvanized steel, fiber-reinforced plastic (FRP), and aluminum. Fiber-reinforced plastic is often preferred due to its lightweight nature, which helps to reduce the energy consumption of the fan. The blade angles of cooling tower fans are adjusted based on the season. For example, during the summer, when air density is lower, the blade angle is increased to enhance fan capacity.
Most open loop and closed loop cooling tower structures are constructed from chemically treated wood. However, depending on the specific application, some cooling towers are now built using fiber-reinforced plastic (FRP) or reinforced cement concrete.
Cold water basins, typically constructed from reinforced cement concrete (RCC), serve two primary functions. First, they act as reservoirs for collecting and storing water from the cooling tower. Second, they provide the foundational support for the cooling tower structure. These basins are generally positioned either below ground level or on the surface of the soil. The height of the cooling tower, whether open loop or closed loop, is determined by measuring the distance from the top of the water basin to the fan assembly.
Drift eliminators are designed to minimize the amount of water carried away by the exhaust air in a cooling tower. By directing the air flow in multiple paths, these devices reduce water loss. Typically made from PVC, drift eliminators work by increasing the number of air passes through them, which lowers drift loss but also raises pressure drop, thereby increasing fan power consumption. In large-scale industrial settings, more robust drift eliminators are employed to handle the demands.
In open loop and closed loop cooling towers, the fill media facilitates the contact between air and the water surface. This media helps the water spread into thin, flowing layers, maximizing the surface area exposed to the air flow. Fill media is typically made from materials such as polypropylene, wood, or PVC. There are three primary types of fill media: vertical offset fill, cross-corrugated fill, and vertical fill.
This section will explore the different types of both closed loop and open loop cooling towers.
Closed loop cooling towers can be categorized into the following types:
These closed loop cooling towers operate similarly to dry cooling systems, but they also incorporate pre-cooling pads. As water passes over the porous media, air is drawn through the pads to enhance cooling efficiency.
These closed loop cooling towers are ideal for applications where water conservation and minimal maintenance are crucial. They do not require water treatment as they operate without using water.
These closed loop cooling towers enhance efficiency by integrating both dry and evaporative cooling methods, which helps to minimize water usage.
This variety of closed loop cooling tower removes the necessity for a heat exchanger between the heat rejection system and the process loop. By relying primarily on evaporation for cooling, these towers offer energy-efficient performance within a smaller footprint compared to dry coolers.
Closed loop systems enhance water conservation compared to open loop systems by significantly reducing the need for blowdown of basin water.
In dry mode, these units handle heat rejection up to their dry capacity. Once the load surpasses this threshold, the system transitions to evaporative mode, thereby boosting its cooling capability.
By reducing the temperature of the incoming air measured by the dry bulb, greater heat rejection is achieved. Consequently, adiabatic systems are ideal for hot, dry climates and are more water-efficient.
Open loop cooling towers can be categorized into the following types:
This cooling tower type is ideal for industrial uses. It features a design where air moves horizontally through the fill media, while water descends vertically.
As the name suggests, the fan-less, fill-less cooling tower operates without a fan or fill media for cooling wastewater. Instead, it relies on ambient wind to pass through its cooling structure.
This type of open loop cooling tower features wooden louvers that act as sidewalls to prevent water from spilling. It is considered the most cost-effective option and demands minimal maintenance compared to other cooling tower types.
This type of cooling tower is typically employed in environments with dirty water, such as in oil refineries and chemical processing. It is designed to handle water contaminated with substances like ammonia compounds, fats, oils, and other pollutants.
The field erected cooling tower is available for those industries or manufacturing plants that cannot find the right standardized design of cooling towers for their specific needs. This type of open loop cooling tower is custom made. It is constructed using pultruded fiberglass and it uses steel as fasteners, fiberglass reinforced polyester sheets for cladding, pultruded FRP sections.
The round or bottle cooling tower is renowned for its advanced technology and highly efficient compact design. Available in various sizes, its circular shape promotes uniform airflow, ensuring optimal heat transfer across its surface area and unit volume.
This type of open loop cooling tower employs counter flow induced draft technology and features cross-corrugated PVC film for its fill media. Constructed from fiberglass-reinforced plastics, it is typically pre-fabricated at the manufacturer's facility and assembled at the installation site.
This cooling tower is one of the most well-known models. It also utilizes counter flow-induced draft technology, similar to the round cooling tower. It features heat transfer media composed of cross-corrugated PVC film fills.
The rectangular cooling tower is constructed from fiberglass-reinforced plastics, with architectural elements made of mild steel or hot-dipped galvanized steel. It comes in both single-cell and multi-cell configurations.
This type of cooling tower is suitable for both new and existing projects. Fiberglass-reinforced plastic (FRP) provides several benefits over traditional construction materials such as wood, concrete, and steel.
This section will explore the various uses, advantages, and enhancements in efficiency associated with both open loop and closed loop cooling towers. It will also cover important factors to consider when selecting between these types of cooling towers.
Open loop and closed loop cooling towers can be applied in various scenarios, including:
Advantages of using open loop cooling towers are as follows:
Advantages offered by closed loop cooling towers include:
To enhance the performance of both open loop and closed loop cooling towers, consider the following:
Adding a new pipe in necessary locations can boost energy efficiency, even if only a single section of new piping is required.
A cooling tower should recycle at least 98% of the water. If it fails to achieve this, maintenance is necessary. Efficient water recycling enhances both water and energy usage.
It's important to monitor the number of cooling cycles your tower operates. Increasing the cycles from three to six can notably improve efficiency and conserve water.
Key factors to keep in mind when choosing between open loop and closed loop cooling towers include:
In closed loop cooling towers, the heat transfer efficiency between the cooling water and the process can be optimized under peak design conditions. This is because closed loop systems use clean water, leading to an improved coefficient of heat transfer. Additionally, some closed loop towers may incorporate a separate intermediate heat exchanger. This setup simplifies maintenance and reduces overall capital expenses. Should any fouling occur, it will be confined to the intermediate heat exchanger involved in the heat rejection process, making it easier to address.
Open loop cooling towers can achieve a lower approach temperature with relative ease. It's important to consider that in these systems, there are two types of approaches to account for: one at the cooling tower and another at the heat exchanger. When aiming for a lower approach, open loop cooling towers are often advantageous.
Return head can be used effectively since there is no exposure of cooling water to the atmosphere in closed loop cooling towers. The head that is needed for the circulation of the cooling water shall only be the resistance of the heat exchanger and the frictional head. The static head needed by the pump can be totally eliminated. Since the cooling water used for heat transfer is not exposed to the atmosphere, corrosion and scaling problems can be eliminated.
Closed loop cooling towers feature two separate circuits, which results in a lower water volume for treatment purposes. This design allows for more efficient management of the water treatment process.
Closed loop cooling towers prevent corrosion in process heat exchangers by keeping the cooling water isolated from direct atmospheric contact. This isolation protects the water from contamination by airborne particles, thereby safeguarding the heat exchangers from corrosion and other issues associated with water exposure.
Although a standalone open loop cooling tower typically requires minimal maintenance, the overall upkeep of the complete cooling system, including pipes and heat exchangers, tends to be significantly higher compared to the maintenance needs of closed loop cooling towers.
Both open and closed loop cooling towers rely on the process of water evaporation to function. For a given heat load, both types of towers require a similar volume of water. However, closed loop cooling towers can provide an advantage in terms of reducing water consumption, thanks to their design that incorporates air/dry cooling features.
Open loop cooling towers generally involve lower initial costs because they do not include an intermediate heat exchanger.
Operating closed loop cooling towers is cost-effective thanks to their enhanced operational stability, reduced pumping power requirements, and overall efficiency improvements.
While open loop cooling towers are simple to scale up, closed loop systems demand advanced design expertise due to the incorporation of an intermediate heat exchanger.
Each class of cooling tower, either open loop or closed loop, has different types of designs with different capabilities and advantages. Therefore when picking an open loop or closed loop cooling tower for a specific application, one must consider the design specifications that meet the application requirements.
Cooling towers are specialized heat exchangers that remove heat from water mainly by means of latent heat loss from evaporation while coming into contact with an airstream. Aside from evaporative cooling, water is also cooled by sensible heat transfer due to the temperature difference between air and water...
Air cooled chillers are refrigeration systems that cool fluids and work in tandem with the air handler system of a facility. Air cooled chillers are types of chillers that rely on the use of fans to reject heat outside the...
Air-to-air heat exchangers (AAHX) are part of a balanced ventilation system where hot extracted air is recovered and transferred to the incoming air supply. The process allows the heat in the extracted air to be recovered to...
Boiler rental is a service that is offered by boiler manufacturers to assist customers in times of emergency, high usage, or as a cost effective permanent solution. Every type and size of boiler is available for rental from ones...
A chiller is a cooling mechanism designed to produce fluids that can lower temperatures by removing heat from the fluid. The type and use of a chiller depends on the required temperature and kind of refrigerant, which can be a liquid or a gas...
A glycol chiller is a chilling system that uses a percentage of glycol mixed with water to create extremely low temperatures far beyond the freezing point of water. The two types of glycol are ethylene glycol based or propylene glycol based...
Heat exchangers are pieces of equipment used to transfer heat between two or more fluids. This process usually involves abundant working or utility media such as water or air that rejects or absorbs heat from a more valuable fluid such as crude oil, petrochemical feedstocks, and fluidized products...
A high pressure boiler is a shell and tube heat exchanger that use boiled water to create steam or high pressure hot water. Using water filled tubes in a metal tank or enclosure, they create power by converting water into steam through thermal energy, which is used...
Laser cooling is a multi-process that includes a number of techniques in which atomic and molecular samples are cooled down to a temperature near absolute zero. These techniques depend on...
A plate heat exchanger (PHE) is a compact type of heat exchanger that utilizes a series of thin metal plates to transfer heat from one fluid to the other. These fluids are typically at different temperatures...
A shell and tube heat exchanger (STHE) is a type of heat exchanging device constructed using a large cylindrical enclosure, or shell, that has bundles of perfectly spaced tubing compacted in its interior. Heat exchanging is the transfer of heat from one substance or medium to a similar substance or medium...
A steam boiler is a steam producing heating system. It creates energy by heating water to get steam. It is a heat exchanger that makes steam for outside usage and has a combustion chamber and water container. The several varieties of steam boilers include...
A water chiller, or chilled water system, is a type of refrigeration system which uses water as a secondary refrigerant. They are used for larger, more complex, heating, ventilating, air conditioning, and refrigeration (HVACR) applications...
A water tube boiler is a boiler that has a set of tubes through which water circulates and is heated by heated gasses from its furnace or combustion chamber that is located below the tubes. Fuel, burning in the...