The content of this article explains the use, manufacture, and types of aluminum channels.
You will learn more about topics such as:
An aluminum channel is a strong metal component crafted through extrusion, enabling a diverse array of shapes, forms, and designs perfect for numerous uses. One significant benefit of aluminum channels is their lightweight nature, approximately one-third the weight of steel, yet they retain remarkable durability and dependability. The unique channel shape is distinguished by its internal radii at the corners.
Aluminum channels are utilized in a wide range of applications, especially where corrosion resistance and lightweight construction materials are crucial. They are commonly employed in retail mounting fixtures, protective edge and face framing, LED lighting setups, and truck bed framing. The two main alloy grades for aluminum channels are 6061 and 6063.
Aluminum channels are a cornerstone of structural engineering, fabrication, and construction due to their unrivaled versatility, lightweight properties, and exceptional durability. Available in multiple cross-sectional profiles, aluminum channels can be custom cut to virtually any length and thickness, commonly ranging from 0.01 inch to 5 inches, catering to both residential and industrial applications where strength-to-weight ratio, corrosion resistance, and ease of installation are crucial. Their adaptability and low maintenance requirements make aluminum channels a preferred choice for commercial builders, architects, and DIY enthusiasts looking for reliable options for framing, reinforcement, and specialty design projects.
Whether you’re seeking structural support for infrastructure, enhanced weather resistance for exterior projects, or aesthetic trim for interior design, aluminum channel profiles deliver a perfect blend of functionality, value, and customization. Their ability to be shaped, extruded, and finished to exact specifications increases installation efficiency while maintaining structural integrity, which is why aluminum channels remain one of the most widely used metals in the construction materials market today.
Angle aluminum channels, also known as L-shaped aluminum channels or angle extrusions, form a precise 90-degree angle. They are the simplest, most cost-effective, and widely used variety of aluminum channels. Manufactured from a range of aluminum alloys—such as 6061 and 6063 for enhanced machinability and weldability—these channels play a vital role in architectural trim, edge protection, and finishing. The finish options range from mill finish to anodized or powder-coated, offering designers the freedom to match specific aesthetic or functional requirements.
You'll commonly find aluminum angle channels in applications like roof edges, window and door framing, cabinet reinforcement, handrails, shelving supports, and sealing corners in commercial and industrial buildings. Their inherent corrosion resistance and ability to withstand exposure to harsh weather conditions make them suitable for outdoor environments as well as high-moisture indoor settings.
The right angle of angle trim can be squared for a sharp edge or rounded for a smooth curve, as illustrated in the image below. The legs of the angle can vary in length from 1/8 inch to 4 inches, accommodating a broad range of structural and decorative needs. Popular industries utilizing angle aluminum channels include automotive, marine, aerospace, and general manufacturing due to their structural reliability and ease of fabrication.
C-shape aluminum channels, also referred to as structural C channels or aluminum C-sections, exhibit a broad range of cross-sectional variations in their interior and exterior corners and flanges. The three primary types are Aluminum Association (with thicker walls and rounded inner corners), American Standard (with flanges that taper toward the top and rounded corners), and Canadian Standard. These channels are extruded in alloys suited for both light-duty frameworks and heavy-duty load-bearing applications.
Another popular form is the U-shaped C channel, which includes a web and two flanges, sometimes featuring inward-bent tops for inserting a nut channel—a common practice in modular framing systems and adjustable structures. Custom dimensions in web widths and flange lengths, and various finishes including anodized, brushed, or powder-coated, expand their utility and visual appeal, as shown in the images below.
C channels are prized in architectural metalwork, millwork protection, wood panel accenting, construction framing, vehicle chassis applications, racking systems, store fixtures, and more. Their combination of lightweight strength, resistance to corrosion, and clean modern appearance adds value to both structural and design-focused builds.
The F-shaped aluminum channel, or F-section, features a profile that resembles the letter F and shares close similarities with U channels, but offers a unique extended web design without a flange. This configuration provides greater flexibility for panel edge protection, transitions, partition framing, and window glazing. Customizable web length and flange spacing further allow F channels to accommodate specialty installation requirements in curtain wall systems, displays, and cabinetry.
H aluminum channels, encompassing both "uppercase H" (symmetrical) and "lowercase h" (asymmetrical) styles, are designed for applications requiring robust stability and support. They are extensively used in window systems, commercial door frames, curtain walls, divider panels, and railing assemblies. Their configuration allows for seamless alignment of panels while delivering superior load dispersion. Available in both decorative and structural grades, and offered with anodized or painted finishes, H channels ensure durability under heavy use and variable environmental conditions.
Due to their structural integrity, H aluminum channels are sought after for both commercial and residential projects. Adjustable features like battens and an array of width and wall thickness options provide adaptability for different architectural and construction requests. In acoustic paneling and modular ceiling grids, "h" channels are routinely utilized for secure and attractive edge finishing.
Hat-shaped aluminum channels, or hat furring channels, are engineered for furring and leveling walls, ceilings, and exterior surfaces in both commercial and residential construction. Their unique hat-like profile—with horizontal flanges—delivers a high strength-to-weight ratio, efficiently supporting drywall, metal panels, plasterboard, and masonry. Hat channels are highly valued for their moisture resistance, fire protection, and anti-corrosion properties, especially in environments where humidity and water exposure are concerns.
Both hat channels and Z channels contribute to structural reinforcement, surface protection, and alignment of substrates. In addition to protecting against fire, moisture, and corrosion, hat channels ensure optimal structural integrity by mitigating unevenness in walls and ceilings—making them indispensable in remodeling, renovation, and new construction.
The I-shaped aluminum channel, commonly referred to as the aluminum I-beam or I-section, is a vital component in heavy-duty structural applications. These beams are characterized by a wide web with shorter flanges and rounded edges—engineered to handle exceptional loading and span distances without significant deflection. Popular in bridges, mezzanines, platform framing, and support crossbeams, I-channel aluminum delivers exceptional strength, minimal weight, and long-term resilience, outperforming traditional steel in certain environments due to its non-corrosive nature.
J aluminum channels are cataloged as essential components in vinyl siding installations, commercial storefront systems, trim work, and edge containment in exterior building envelopes. They are expertly designed to mount siding securely at corners, along rooflines, or around entry points, providing an airtight, weatherproof seal that enhances building envelope energy efficiency. Quick to install and requiring minimal specialized tools, J channels help reduce labor and material costs while permitting rapid fit and finish work.
Since their introduction in the 1950s, J channels have been increasingly adopted in both new construction and remodeling. The distinct J shape, formed from a 90-degree bend, is engineered for precise channeling of water runoff, expansion-and-contraction movement of building materials, and clean visual transitions in metal fabrication projects.
T-slot aluminum channels are high-performance extrusions featuring precision-engineered T-shaped slots that allow for the sliding and positioning of T-nuts or specialized fasteners. This innovative modular framing solution eliminates the need for clamping or welding, greatly increasing assembly flexibility and ease of adjustment. T-slot channels streamline the design of industrial machine frames, laboratory enclosures, workstations, guarding systems, modular displays, and automation equipment.
Thanks to their adaptability, T-slot channels enable efficient assembly and reconfiguration, supporting rapid prototyping and lean manufacturing workflows. Their corrosion resistance, superior machinability, and lightweight construction make T-slot extruded aluminum a go-to solution for industrial automation, robotics, and custom architectural frameworks.
U-shaped aluminum channels, also called channel profiles or U sections, are among the most popular and broadly applicable types. They are available in a range of wall thicknesses—from as little as 1/16 inch to 1/4 inch—and defined by their straight web and perpendicular flanges. U channels are engineered for edge protection, structural support, sliding track systems, glass panel framing, curtain wall components, and architectural accents. With optional finishes such as bright anodized, brushed, or mill, they can complement modern interior designs or deliver industrial-grade performance.
The flexibility in channel dimensions and wall thickness allows customization for specific weight loads, impact resistance, and design demands. This makes U-shaped aluminum channels highly sought after for shelving, cabinetry, window frames, protective edging, and more.
Z-shaped aluminum channels, also referred to as Z-section profiles or Z bars, feature two flanges extending in opposing directions from the web, mimicking the silhouette of the letter Z. These are regularly used for metal and wood roofing systems, siding support, panel receivers, and flashing installation. Z channels provide a reliable secondary structure for attaching sheet panels and are especially valued as alternatives to J channels due to their enhanced ability to channel water, prevent leaks, and accommodate panel movement.
Z channels come in a range of sizes and thicknesses. "Z clips" are designed for low-profile attachment, while "Z bar" channels retain the traditional Z cross-section for greater structural reinforcement. These channels function well in both building exteriors and interior panel systems where alignment and weather resistance are paramount.
The ten primary aluminum channel types described above merely scratch the surface of this versatile product family. With rapid strides in aluminum extrusion technology and custom fabrication, new profiles and specialized alloy grades continue to be developed to meet the architectural, structural, and industrial demands of modern engineering projects. Whether for load-bearing frameworks, design accents, energy-efficient building envelopes, or advanced manufacturing automation, aluminum channels remain a go-to structural component, beloved for their high performance, corrosion resistance, long lifespan, and design adaptability.
Still exploring which aluminum channel best fits your application? Consider factors such as load rating, corrosion protection, finish type, ease of installation, and compatibility with other building materials. Consulting with an aluminum extrusion specialist or fabricator can help you select the optimal aluminum channel profile to meet your project’s unique requirements, ensuring exceptional results in both performance and aesthetic appeal.
As a specialized form of aluminum extrusions, aluminum channels are produced using a variety of advanced manufacturing equipment. While there are few dedicated resources discussing the best machines specifically for aluminum channel fabrication, the equipment used for aluminum extrusion and downstream processing plays a crucial role in achieving consistent quality, dimensional accuracy, and high productivity for channel profiles, U-channels, and other structural shapes. Below, we highlight leading brands and top-rated machinery commonly utilized throughout North American extrusion plants for producing aluminum channel products.
Description: Presezzi Extrusion Group is a leading global provider of aluminum extrusion equipment, with a strong reputation for engineering innovation in the metal forming industry. The P7 Extrusion Press is recognized for its advanced automation, high precision, and superior process control over the extrusion of complex profiles, including aluminum channels. Engineered for efficient energy use and maximum durability, the P7 model supports a broad range of extrusion profiles—making it ideal for manufacturers seeking to produce architectural aluminum channels, industrial framing, or custom shapes to tight tolerances. Integrated monitoring systems and programmable logic help reduce downtime and support a streamlined production workflow.
Description: HPM (Hamilton Plastic Molding) stands as a prominent manufacturer of heavy-duty industrial machinery, including aluminum alloy extrusion presses. The HPM Aluminum Extrusion Press is specifically designed to deliver high output rates and exceptional accuracy, handling multiple alloy compositions and various channel designs. Its flexible configuration enables quick changeovers, perfect for manufacturers producing a mix of standard and custom extruded aluminum channels. High-force hydraulic systems and intuitive control panels contribute to process efficiency and enhanced product consistency for end users demanding structural reliability and flawless finishes.
Description: Inductotherm Group is a global leader in induction heating solutions for the metals industry. The Alpha 2 Billet Heating System utilizes sophisticated induction heating technology to quickly and efficiently heat aluminum billets—a critical preparatory step in the extrusion of high-quality aluminum channels. Advanced temperature monitoring and adaptive power delivery ensure uniform heating, which is essential for minimizing defects and achieving optimal extrusion speed and metallurgical properties. As energy efficiency and precise process control grow in importance, systems like the Alpha 2 help manufacturers streamline their operations while meeting exacting customer specifications for aluminum channel strength and appearance.
Description: CEC Extrusion Technology is renowned for its innovative downstream extrusion equipment. The CEC Dual Puller system expertly handles and pulls extruded profiles, such as aluminum channels, ensuring straightness, minimal deformation, and consistent dimensions throughout the cooling and fabrication process. Adjustable pulling speeds, robust gripping mechanisms, and fully synchronized material handling capabilities allow for smooth integration with high-speed extrusion lines. This automation is vital for achieving superior quality in finished architectural channels destined for construction, framing, and transportation applications.
Description: RDM Industries is a trusted manufacturer of cutting and fabrication equipment for extruded aluminum profiles. The RDM M-Series Flying Cutoff Saw is specifically engineered for the efficient, high-speed cutting of aluminum channels to custom lengths. Featuring programmable length control, digital saw movement, and precision angle settings, this cutting system supports flexible production schedules and complex customer requirements. Its accuracy and reliability minimize scrap and support high-throughput, value-added aluminum fabrication operations.
Choosing the Best Equipment for Aluminum Channel Extrusion
When selecting machinery for manufacturing aluminum channels, it is essential to consider key factors such as extrusion press tonnage, billet heating system precision, downstream automation, and integrated material handling capabilities. Customization options, energy efficiency, safety features, and scalability are also top priorities for aluminum manufacturers and fabricators wishing to stay competitive in the metalworking industry. Modern extrusion equipment frequently supports the production of an extensive range of aluminum profiles, including C-channels, U-channels, Z-channels, and custom shapes featuring tight tolerance requirements, corrosion resistance, and alloy versatility.
In addition to extrusion presses and billet heaters, ancillary equipment such as automated profile stackers, cooling tables, layout saws, and finishing stations are vital for optimizing the efficiency and output of aluminum extrusion lines. For businesses focused on architectural, commercial, or industrial aluminum products, working closely with equipment vendors ensures that production lines are tailored to meet evolving project demands and industry quality standards.
Note: Model availability, technical specifications, and feature sets may evolve over time as technology advances. For the latest information and custom solution options, contact extrusion equipment manufacturers directly or consult their most recent product and service catalogs to identify systems designed specifically for high-quality aluminum channel production.
An aluminum channel is an extruded metal component valued for its lightweight, strength, and corrosion resistance. It’s chosen for framing, reinforcement, and protective or decorative applications across construction, retail, industrial, and architectural projects.
Primary aluminum channel types include angle, C, F, H, hat, I, J, T-slot, U, and Z shapes. Each profile serves distinct structural, framing, or finishing needs in both commercial and residential construction.
Angle, hat, and J aluminum channels are ideal for outdoor or humid environments. Their corrosion resistance and moisture protection make them suitable for roof edges, exterior trim, siding, and building envelopes.
Manufacturers use advanced extrusion presses, billet heating systems, dual pullers, and flying cutoff saws to ensure aluminum channels meet exact tolerances and high quality standards for custom or standard profiles.
Yes. Aluminum channels can be customized in length, thickness, finish (anodized, powder-coated, brushed), and alloy composition to match specific architectural or structural requirements.
U-shaped aluminum channels commonly have wall thicknesses ranging from 1/16 inch to 1/4 inch, catering to diverse load and design needs in shelving, cabinetry, and framing applications.
Since the advent of its mass production, aluminum has become essential in construction as well as industrial and commercial applications. Its impressive strength-to-weight ratio and aesthetic appeal make it the top choice for various projects. Additionally, aluminum aligns with 21st-century environmental concerns due to its recyclability, repurposability, and reusability.
One of the key attractions for builders and designers is aluminum's low cost, which allows for the production of complex and detailed products at affordable prices. Despite its many advantages, the variety of available finishes plays a crucial role in aluminum's versatility and appeal.
There are a couple of reasons designers and engineers decide to have aluminum finished.
Aluminum naturally forms an oxide film when exposed to air, which generally provides effective protection against corrosion and environmental damage. However, in extreme conditions, additional protection is necessary, which can be achieved through appropriate finishing techniques.
Applying a finish allows designers to select an aesthetic that complements their project. The diverse range of aluminum channels can be enhanced with finishes to serve as finishing touches or standout features. The right finish adds to the overall appeal and quality of the aluminum.
Various mechanical methods are employed to finish aluminum channels, aimed at achieving a smoother surface or specific patterns. These mechanical finishes include:
Pretreating is a preparatory process used alongside strip cleaning before the coating application. This process can be carried out chemically or electrolytically, with the chemical method being the most common due to its compliance with various federal regulations and suitability for architectural, construction, and transportation applications. The pretreatment process must be executed with precision to prevent contamination of the aluminum surface.
Pretreatment provides the following functions and benefits:
While pretreatment might appear to be a minor step in aluminum channel processing, it plays a crucial and essential role.
Bright dipping is a chemical polishing process used to enhance aluminum channels before anodizing. Conducted at high temperatures, this process requires precise control to maintain the correct chemical balance between nitric acid, phosphoric acid, aluminum suspension, gravity, and temperature.
The result of bright dipping is a highly reflective and bright finish on aluminum channels. The finish becomes brighter with the harder temper of the aluminum alloy. While the process smooths the aluminum surface at a microscopic level, it does not eliminate scratches or other blemishes. Typically, this process is applied to aluminum alloy 6063 T6 for channels.
As with some of the other processes, anodizing is an electrochemical process but is more passive than the more aggressive chemical methods. The outcome of anodizing is the conversion of the substrate of the aluminum channel to a layer of aluminum oxide. Aluminum has a natural oxide layer that forms when it is exposed to the air. The natural layer of oxide is uneven and thin, offering inconsistent protection.
Applying a controlled electrical charge in an acidic electrolytic bath forms a consistent and uniform layer of oxide on the aluminum, enhancing protection against corrosion and wear. This anodic layer also enables aluminum channels to undergo additional processing, including the application of colorants and lubricants.
Despite its limitations, liquid paint is still a viable option for finishing aluminum channels. To ensure proper adhesion, the aluminum surface must be pretreated with sprays before painting. Liquid paints offer a broader and more vibrant color range, including shades that are richer and more distinctive. Available paint types include acrylics, polyesters, silicone polyesters, and polyvinylidene fluoride (PVDF).
The choice of a liquid paint for aluminum channels is dependent on the amount of corrosion resistance required and the needs of the application. In the case of aluminum angles for building construction, liquid paints can include paints that match the colors of the sides of the structure.
Powder coatings are an excellent choice for protecting aluminum channels from environmental damage and corrosion. This type of coating, which consists of phosphates and metal particles, provides robust protection against rust and the effects of harsh weather. While the specific materials used can vary between manufacturers, the overall protective effect remains consistent.
Powder coatings do not preclude the application of paint, and they are available in a wide range of colors. Additionally, a well-applied powder coating can last up to twenty years without needing replacement or refinishing.
Aluminum is the second most commonly used metal in construction, following steel. Channels shaped as C, J, and U are frequently used in construction projects due to their tensile strength, reliability, and durability. Aluminum is alloyed with other metals to improve its performance and longevity, with each alloy being designated by a specific number and intended for particular applications.
Aluminum grades are numbered from 1 to 8, with grade 1 representing unalloyed aluminum and the remaining grades alloyed with metals such as copper, magnesium, silicon, zinc, and nickel. These alloying elements enhance the properties of raw aluminum, resulting in varied characteristics suited to different purposes.
Grade 6063 is known for its medium strength and is frequently used in the extrusion of aluminum channels. It is capable of being extruded into shapes with very thin walls and small dimensions. Its lustrous finish makes 6063 a popular choice for architectural applications.
Grade 6063 is often referred to as the architectural alloy due to its high tensile strength, excellent finishability, and exceptional corrosion resistance.
The silicon content in 6063 refines the alloy's grain structure, enhancing its fluidity, while the magnesium content contributes to its strength and durability.
Key properties of grade 6063 include:
Similar to grade 6063, grade 6061 is alloyed with silicon and magnesium, with magnesium at approximately 1% and silicon at around 0.6%. This alloy combination enhances 6061's resistance to corrosion, stress, and cracking, while also providing good formability and weldability. Due to its superior strength, aluminum grade 6061 is commonly used in structural applications.
Grade 6061 shares many of the same attributes as grade 6063, including weldability, corrosion resistance, and suitability for coating and polishing. However, unlike 6063, grade 6061 is less malleable and requires substantial force for bending or cold working. Cold forming of grade 6061 demands careful handling and precision to maintain quality and performance.
Grade 7075 is a high-strength aluminum alloy with excellent resistance to stress corrosion cracking. It is widely used in the aerospace industry due to its impressive strength-to-weight ratio. At sub-zero temperatures, the strength of grade 7075 increases. Its primary alloying elements include zinc and copper, complemented by smaller amounts of magnesium, iron, silicon, manganese, chromium, and titanium.
Grade 7075 can be anodized just like other aluminum alloys and boasts a high machinability rating, allowing it to be shaped, cut, and processed with ease. It is noted for its exceptional durability, corrosion resistance, and resistance to cracking. However, unlike grades 6063 and 6061, grade 7075 is not easily welded and requires specialized welding techniques.
Grades 6063 and 6061 are among the most commonly used aluminum alloy grades, with grade 7075 being chosen for its exceptional strength and durability. However, these three alloys are not the only ones used in aluminum channel production. Other notable grades include 2024, 5083, 7050, 5086, 5456, and 6082. The selection of the appropriate alloy is crucial for ensuring that the aluminum channels meet the specific requirements of various applications.
Aluminum temper classifications are categorized into five types: F, O, H, W, and T, each indicating a specific treatment class. Each letter designation is followed by a number that signifies the strength or degree of the treatment. This temper designation is appended to the alloy number to inform producers and users about the specific mechanical properties imparted to the alloy.
For aluminum grades 6063 and 6061, the tempering designation will typically be T-5 or T-6, which indicates the level of thermal treatment the alloy has undergone.
The primary method for forming and producing aluminum channels is extrusion. This process involves forcing an aluminum alloy through a die with the cross-sectional profile of the desired channel. Extrusion is straightforward and involves applying pressure to the raw alloy, pushing it through a die to shape the aluminum channel.
Aluminum channel extrusions are categorized into two types: solid and semi-hollow. Solid extrusions, like angle channels, have no internal voids or openings. Semi-hollow extrusions, such as C channels, feature partially enclosed voids.
The extrusion process starts with a round die crafted from high-grade steel. For many standard aluminum channels, pre-existing dies are used, which are retrieved from storage. The die is preheated to temperatures ranging from 400°C up to 500°C to enhance its durability and ensure consistent metal flow. Once the die reaches the desired temperature, it is installed in the extrusion press.
Aluminum used for manufacturing channels is provided in the form of solid cylindrical blocks, or billets. These billets are heated to temperatures ranging from 750°C up to 930°C to make them malleable for the extrusion process. The heating raises the billet to a temperature just below its melting point, making it pliable enough to be forced through the die.
The malleable, heated billet is mechanically transferred to the extrusion press, where it is treated with a release agent or lubricant to prevent it from sticking to the ram or die.
The loading process of the billet is illustrated in the diagram below. The billet is placed into the extrusion press chamber and pushed through the die. In this example, the flow direction is from left to right, with the extruded aluminum channel emerging on the right.
Hydraulic pressure, up to 15,000 tons, is applied by the ram to push the billet through the die. As the pressure increases, the billet material expands to fill the walls of the extrusion chamber and is compressed against the die. This force causes the billet to become smaller and wider until it completely fills the chamber, forcing the softened aluminum to exit solely through the die. The aluminum takes on the desired shape as it is squeezed through, forming the final aluminum channel profile.
After the extruded channel exits the die, it is captured by a puller that guides it along the runout table. The channel is then cooled through quenching methods, which may involve a water bath, spray mist, air, or fans. Once the channel has traversed the length of the table, it is cut by a hot saw to make space for the next extrusion.
After the extrusions are removed from the runout table, they are transferred to a cooling table where they remain until they reach room temperature. During the extrusion process, twisting may occur, causing imperfections in the profiles. These issues are addressed through a stretching and straightening process.
Stretching and straightening involve a mechanism that grips the aluminum channel at both ends. The channel is then pulled and stressed until it is fully straightened and meets the required tolerances and specifications.
Once the extrusions have cooled to room temperature, they are cut to the required lengths using a finishing saw, typically a circular saw.
After the aluminum channels are cut to length, they may undergo additional processes such as anodizing, powder coating, or aging. The choice of these final treatments depends on the intended application of the channels and the specific protective features required.
Since its introduction in the early twentieth century, aluminum has become integral to various facets of modern life, ranging from aluminum cans to structural I-beams in buildings. Its unique combination of lightness and strength allows it to be adapted for numerous applications.
One essential use of aluminum is in channels, which serve as the framework for display cases, building corners, and decorative elements in architecture. The versatility and durability of aluminum channels have cemented their role in engineering plans and design schematics.
The diverse properties of aluminum channels make them a vital and versatile solution for a wide range of processes and applications.
Aluminum offers twice the conductivity of copper by weight, making it an optimal choice for large capacity overhead power lines.
While aluminum's malleability might suggest a lack of strength, this property actually enhances its versatility. Unlike other metals, aluminum retains its strength across various conditions, whereas other metals may become brittle in cold weather or susceptible to corrosion. With one-third the weight of steel but a superior strength-to-weight ratio, aluminum channels are perfect for applications requiring lightweight load-bearing capabilities.
Aluminum channels are particularly beneficial in applications where weight and rigidity are crucial for protection. They offer significant advantages over copper in such scenarios.
The selection of aluminum channels for construction is often based on their high resistance to rust and corrosion. Unlike other metals that may deteriorate under harsh conditions, aluminum channels maintain their strength and durability.
Aluminum channels are utilized in modern electronics due to their non-magnetic properties, which prevent interference in applications sensitive to magnetic fields.
Aluminum channels are safe for use in environments that are highly flammable or potentially explosive, as they do not produce sparks.
In today’s world, the ability to recycle raw materials is a key focus across social, commercial, and industrial sectors. Aluminum’s recyclability is a major factor in its widespread use, as aluminum components, parts, and channels can be returned to manufacturers for repurposing, reprocessing, and remanufacturing into new raw materials.
Aluminum trim is an aluminum product that is produced by extrusion to create long, narrow, pliable, and adaptive pieces of aluminum that can be used for architectural decorative applications and accents, indoor and outdoor lighting, and engineering design...
Extruded aluminum is a continuous piece of aluminum that usually has a constant profile or cross-section throughout its length. It is made by forcing a block of aluminum, called a billet, through a die opening which is smaller than the original cross-sectional area of the billet...
Aluminum extrusion, or the extrusion process, owes its beginnings to three men – Joseph Bramah, Thomas Burr, and Alexander Dick. Each of them advanced and perfected the process so that inventors from the industrial revolution could improve it...
Aluminum 1100 is the softest of the aluminum alloys, which makes it easy to shape and form into a wide range of products for industrial and home use. It can be cold and hot worked but is frequently shaped by...
The term "aluminum coil" describes aluminum that has been flattened into sheets where their width is significantly higher than their thickness and then "coiled" into a roll. Stacks of individual aluminum sheets are difficult to...
Aluminum piping and tubing is silvery-white, soft, and ductile. The metal belongs to the boron group. Aluminum is the third most abundant element present on earth. Aluminum has low density. When exposed...
Anodized aluminum is aluminum that has undergone an anodizing process to create an exceptionally durable, corrosion-resistant, and highly aesthetic surface. Anodizing creates a stable aluminum oxide layer fully integrated with...
A wire brush is an abrasive tool that has stiff bristles made from a variety of rigid materials designed to clean and prepare metal surfaces. The filaments of wire brushes are small diameter pieces of inflexible material that are closely spaced...
Aluminum is the most abundant metal on the Earth’s crust, but it rarely exists as an elemental form. Aluminum and its alloys are valued because of their low density and high strength-to-weight ratio, durability, and corrosion resistance...